The Digi Connect ME9210 are ultra-compact embedded modules based on the Net Silicon NS9210 ARM9 processor running at 75MHz.
They allow easy implementation of Ethernet connectivity in the design of any electronic device or the retrofit of existing devices.
Their form factor type RJ45 ensures the success of their integration on almost any electronic card. Note the perfect interchangeability of the Ethernet versions, including at the level of a finished product if the precaution has been taken to install the modules on a support. The ME9210 and ME families are also interchangeable with each other with a few precautions or restrictions.
Net Silicon is a manufacturer of the Digi International group, which allows the manufacturer to have a perfect control of the technical characteristics and especially of the durability of the product.
CHARACTERISTICS
|
Digi Connect ME 9210
|
Hardware
|
Processor
|
32bits (NS9210 @ 75MHz)
|
ARM core
|
ARM 926EJ-S
|
Hidden
|
4K I / D
|
Base memory
|
Supports up to 8MB NOR Flash and 16MB SDRAM
|
FIM (Flexible Interface Module)
|
CPU 300 MHz DRPIC165X 2 KB (prog) and 192 bytes (data)
|
Energy management modes
|
On-the-fly frequency divider Low power sleep modes Configurable scaling / wake-up events (EIRQ, UART, Ethernet, ...)
|
Pins / form factor
|
RJ-45 connector style with 20 pin micro connector (Samtec FTS-110-01-F-DV-TR)
|
Fast TTL interface
|
Full signal support (TXD, RXD, RST, CTS, DTR, DSR and DCD) Hardware / software flow control
|
GPIO
|
10 shared I / O, up to 3 external IRQ options)
|
SPI
|
Master: up to 16.7 Mbps Slave: up to 7.5 Mbps
|
I²C
|
Bus interface V1.0 7-bit and 10-bit addressing mode
|
Flexible Interface Support (FIM)
|
UART, 1-Wire, USB (low speed), CAN
|
Watchdog Timer (16bits)
|
Yes
|
JTAG interface
|
Available only on development modules
|
On-board power supervisor
|
Yes
|
Dimension (in mm)
|
36.7 mm x 19.05 mm x 18.67 mm
|
Wired LAN Network Interface
|
LAN
|
10/100 Base T
|
Speed
|
10/100 Mbps (automatic detection)
|
Fashion
|
Full or half duplex (automatic detection)
|
Connector
|
RJ-45 with filters and associated components
|
Power over Ethernet
|
802.3af compatible
|
Environment
|
Operating temperature
|
- 40 ° C to + 75 ° C or -40 ° C to + 85 ° C with external pad
|
Storage temperature
|
- 50 ° C to + 125 ° C
|
Humidity
|
5% to 90% non-condensing
|
Altitude
|
3658 meters
|
Power supply (3.3 VDC)
|
Maximum
|
450 mA (1.485 W)
|
Typical
|
346 mA (1.14 W) UART and Ethernet active
|
Standby
|
186 mA (613 mW) with clock divider / 16 and active Ethernet
|
Sleep mode
|
34 mA (113 mW) wake-up call on EIRQ, Ethernet PHY disabled
|
Certifications
|
List of certifications
|
FCC Part 15 Class B, EN 55022 Class B EN 61000-3-2 and EN 61000-3-3 ICES-003 Class B, VCCI Class II, AS 3548 FCC Part 15 Sub C Section 15.247 IC RSS-210 Issue 5 Section 6.2.2 (o) EN 300 328, EN 301 489-17, UL 60950-1, EN 60950 (EU), CSA C22.2, No. 60950, EN 55024, Intentional radiation
|
DESIGNATION (Non-exhaustive list, consult us for another version)
|
Ref. to order
|
NET + OS Ethernet module Digi Connect ME 9210 Custom with 2MB Flash, 8MB RAM
|
DC-ME-Y401-C
|
NET + OS Ethernet module Digi Connect ME 9210 custom with 4MB Flash, 8MB RAM
|
DC-ME-Y402-C
|
Linux Ethernet Module Digi Connect ME Linux 9210 with 4MB Flash, 8MB RAM
|
DC-ME-Y402-LX
|
Ethernet Serial Module Digi Connect ME Standard Plug & Play 9210 with 4MB Flash, 8MB RAM
|
DC-ME-Y402-S |
NET + OS Ethernet module Digi Connect ME 9210 Custom with 8MB Flash, 16MB RAM
|
DC-ME-Y413-C |
Linux Ethernet Modules Digi Connect ME 9210 Linux with 8MB Flash, 16MB RAM
|
DC-ME-Y413-LX
|
NET + OS Ethernet module Digi Connect ME 9210 with 4MB Flash, 8MB RAM with JTAG connector
|
DC-ME-Y402-JT |
Linux Ethernet Module Digi Connect ME 9210 with 4MB Flash, 8MB RAM with JTAG connector
|
DC-ME-Y402-LX-JT |
JumpStart NET + OS DC ME 9210 Kit Digi Connect ME module JTAG interface (DC-ME-Y402-JT), with USB cable, Digi ESP IDE with GNU Microcross tools, NET + Works development license with Flash modules, Web and Build, Royalty-free ThreadX RTOS, card development, power supply, cables and electronic diagrams
|
DC-ME-9210-NET
|
Linux DC ME 9210 JumpStart Kit Digi Connect ME module (DC-ME-Y402-LX), Embedded Linux kernel 2.6.26, development board, power supply, cables and electronic diagrams
|
DC-ME-9210-LX
|