/
Description
The Nagasaki LCM Industrial Monitor Series is characterized by the existence of a very wide range of dimensions, mechanical presentations and possible options in the following fields: Military, Industrial, Marine and Exterior.
The combination of the multiple choices available for purchase results in a personalized monitor, covering as closely as possible the user's needs or environmental operating constraints.
The basic characteristics are as follows:
- Hardened steel cabinet
- Protective glass on the LCD screen
- Wall mounting (rear) by standard VESA75 / 100/200
- Brightness +/- 300 cd / m²
- 12VDC power supply + mains adapter (external)
- 1 VGA port, 1 DVI-D port, optional BNC port (composite video)
Then, all you have to do is compose your monitor with the options presented in the table below:
| Options | Explanations |
| Screen dimensions | 6.4 "Rugged LCD Monitor, 640 x 480 |
| 7 "Rugged LCD Monitor, 800 x 480, 16: 9 wide | |
| 8 "Rugged LCD Monitor, 800 x 600 | |
| 8.4 "Rugged LCD Monitor, 800 x 600 | |
| 10 "Rugged LCD Monitor, 800 x 600 | |
| 10.2 "Rugged LCD Monitor, 1024 x 600, 16: 9 wide | |
| 10.4 "Rugged LCD Monitor, 640 x 480 | |
| 10.4 "Ruggged LCD Monitor, 800 x 600 | |
| 12 "Rugged LCD Monitor, 800 x 600 | |
| 15 "rugged LCD Monitor, 1024 x 768 | |
| 17 "Rugged LCD Monitor, 1280 x 1024 | |
| 19 "rugged LCD Monitor, 1280 x 1024 | |
| 20.1 "rugged LCD Monitor, 1400 x 1050 | |
| 22 "(21.5" Rugged LCD Monitor, 1920 x 1080 Full HD | |
| 24 "Rugged LCD Monitor, 1920 x 1080 Full HD | |
| 32 "Rugged LCD Monitor, 1920 x 1080 Full HD | |
| 42 "Rugged LCD Monitor, 1920 x 1080 Full HD | |
| 46 "Rugged LCD Monitor, 1920 x 1080 Full HD | |
| 52 "Rugged LCD Monitor, 1920 x 1080 Full HD | |
| Rugged metal case | Resistive hardened touch screen (capacitive or surface wave options). Choice of USB or RS232 interface. |
| Touch screen - T | |
| Aluminum or Stainless - Steel Bezel - AL | |
| Sunlight Readable - SUN | Over-brightness 800 ~ 1000 cd / m² for outdoor use |
| Transflective | Addition of a module acting on the LCD to recover external light and thus increase the contrast |
| IP65 Strainless enclosure - RSS | Stainless steel enclosure (type 304) 6 sealed faces IP65 with 1 VGA port on plug and waterproof cable (length 2m) 1 waterproof 12VDC power socket + mains adapter (not waterproof) Optional additional factory test IP67 |
| Heater Module - HT | Integrated heating (heating resistor) that starts below 0 ° C and stops at 10 ° C. For winter / outdoor starts. |
| Optical Bonding - BNC | Filling with resin, the area between the LCD and the protective glass. Avoids fogging or condensation for outdoor use. |
| Built-in trim | Addition of a recessed trim (a frame) which allows mounting on the front / in a cabinet / in a cabinet / in a kiosk or terminal |
| Extended power supply 9-32VDS | Extended power supply 9-32VDC instead of fixed 12VDC. |
| Dimming | Addition of a module that automatically and continuously adjusts the screen brightness so that the contrast perceived by the user is constant. Used for outdoor / marine / river applications |
| Handless | Handles fixed to the frame of the built-in version monitors |
| Anti-vandals - VP | Made of armored glass with a thickness of 7.5 mm. This glass can withstand shocks and explosion impacts on its surface. This vandal-proof protection also makes the front face explosion-proof. The touch screen used is capacitive technology, which avoids having to bring a plastic film to the surface. The assembly is therefore all the more easily resistant to friction and attempted scratches. The armored glass is easy to clean, including paint stains. The use of solvents or chemicals can then be considered without any particular precaution except for the mounting cover. The use of a capacitive slab protected from an armoured glass also has the advantage of allowing a 90% rate of light transmission, compared to 75% to 78% for resistive technology. |
| Other | All other custom-made mechanical or software options |