SBC based on the ConnectCore 6 QuadPlus 1.2GHz
This map allows you to have all the interfaces necessary to develop a prototype product or a small series at a lower cost and without risk.
Compared to the ConnectCore 6, the ConnectCore 6 MORE enjoys faster processing speed with more cache (1MB L2) and a 64bit DDR3 optimized memory bus. Also the addition of the Microcontroler Assist (MCA/Kortex M0/M4) allows the additional stain management to be detached from the main processor.
The maximum graphic resolution is increased to 2048x1536
Note: Le Heart ConnectCore 6 PLUS module has the same footprint as the ConnectCore6, so no redesign is needed to switch to this new, more efficient processor.
The Connectcore 6 Plus Development Kit contains 1 SBC Pro, 1 cable Console UART, Food and Accessories, Linux Yocto.
| Variations |
SBC ConnectCore CC6 MORE |
| Reference |
CC-SB-WMX-KK8D |
| Processor |
NXP iMX6Quad (Cortex-A9) 1.2GHz with MCA |
| Memory |
2GB RAM DDR3 |
| 8 GB Flash eMMC |
| Networks |
1 x Gigabit Ethernet RJ45 |
| |
Wi-Fi 802.11 a/b/g/n/ac |
| |
Bluetooth 4.2 |
| |
Socket Digi Xbee |
|
NFC Forum Type 2 Tag |
| |
Cellular: Slot PCI Express Lini Card 2.1 and Micro SIM |
| Interfaces |
USB: 3 x USB 2.0 Host, 1 x USB 2.0 OTG |
| |
Series: 2 x RS232, 1 x TTL |
| Bus |
I2C, SPI, GPIO, Dual CAN |
| Storage |
MicroSD Slot, SATA 3.0 |
| Display |
2 x LVDS, RGB Parallel 24 bit |
| |
Resolution Max 2048 x 1536 |
| Camera |
2 x 8 Bit Parallele |
| Audio |
Jack Listener , Line In, Line Out, Microphone header |
| Other |
Power/Reset button, battery connector, JTAG, SWB, |
| Operating temperature |
-40 degrees Fahrenheit - 85 degrees Fahrenheit |
| Format |
100 x 72 mm Pico-ITX |
